| OCXO 82 SERIES | |
|---|---|
|
The OCXO 82 series oscillators are currently our most popular models because of the price and performance options available. The package is a hermetically sealed printed circuit board mount with optional chassis mounting upon request. Applications include telecommunications products such as Stratum 3 and 3E clocks as well as base station frequency references for Cellular, CDMA, TDMA, GSM, and Paging. Other uses include GPS navigation and instrumentation. |
| Specification Table | ||
| Parameter / Model | OCXO 82-2 | OCXO 82-3 |
| Frequency | 10.000000 MHz | |
| R.F. Output | Sine Wave +4 +/- 2dBm into 50 ohms Harmonics < -20 dBc |
|
| Change in frequency versus .. | ||
| Temperature (Ambient) ( 0°C .. +70°C) Referenced to +25°C |
< +/- 50 PPB | < +/- 10 PPB |
| Time* (Aging) Daily 1st Year |
< +/- 5 PPB < +/- 0.5 PPM |
< +/- 1 PPB < +/- 0.1 PPM |
| Time (Warm-Up) Frequency at 10 minutes After power on @ +25°C Referenced to Frequency at 4 hours |
< +/- 50 PPB | < +/- 10 PPB |
| Input Voltage (+/- 5% change) |
< +/- 10 PPB | < +/- 3 PPB |
| Other Parameters | ||
| Phase Noise @ 10 Hz | -105 dBc | -110 dBc |
| Electrical Frequency Adjustment Range** Positive Slope (0 to +5 VDC) |
> +/- 1.5 PPM < +/- 3 PPM |
> +/- 0.4 PPM < +/- 0.8 PPM |
| Mechanical Frequency Adjustment Range** Resolution |
> +/- 1.5 PPM < +/- 5 PPB |
> +/- 0.4 PPM < +/- 2 PPB |
| Input Power | +5 VDC +/- 5%, < 800 mA @
turn on, < 1.8 Watts Steady State @ +25°C |
|
| Package | 2 x 2 x 0.75 inches (LxWxH) | |
| Units | 1 PPM = 1x10-6 1 PPB = 1x10-9 | |
| * All aging stabilities are after storage of up to 1 year
and apply after 30 days of continuous operation. The daily aging rate also applies at the time of shipment from factory. |
| ** The Mechanical Frequency Adjustment Range is sufficient for the life of the oscillator. |
| Specifications subject to change with frequency. |