| OCXO 143 SERIES | |
|---|---|
 |
The
OCXO143 series oscillators are only one inch square and designed for thru-hole mounting.
These packages offer much tighter frequency stability than TCXOs and in some cases cost
less. Frequency adjustment is by electrical means using a potentiometer or D/A converter.
A convenient voltage reference source is available for this purpose. Your choice of AT or
SC cut resonators are available to meet your frequency stability requirements. Download OCXO 143-1 Specification/Outline Download OCXO 143-2 Specification/Outline |
| Specification Table | ||
| Parameter / Model | OCXO 143-1 | OCXO 143-2 |
| Frequency | 10.000000 MHz | |
| R.F. Output | Sine Wave +4 +/- 2dBm into 50 ohms Harmonics <-20 dBc |
|
| Change in frequency versus .. | ||
| Temperature (Ambient) ( 0°C .. +70°C) Referenced to +25°C |
< +/- 0.1 PPM | < +/- 20 PPB |
| Time*(Aging) Daily 1st Year |
< +/- 10 PPB < +/- 1 PPM |
< +/- 1 PPB < +/- 0.1 PPM |
| Time (Warm-Up) Frequency at 3 minutes After power on @ +25°C Referenced to Frequency at 4 hours |
< +/- 0.1 PPM |
< +/- 10 PPB |
| Input Voltage (+/- 5% change) |
< +/- 30 PPB | < +/- 10 PPB |
| Other Parameters | ||
| Phase Noise @ 10 Hz | -90 dBc | -115 dBc |
| Electrical Frequency Adjustment Range** Positive Slope (0 to +4 VDC) |
>+/- 10 PPM < +/- 20 PPM |
>+/- 0.4 PPM < +/- 1.0 PPM |
| Reference Voltage Output (Used to drive the electrical frequency adjustment input) |
+4 VDC +/- 5% <+/- 10 mV, 0°C to +70°C Referenced to +25°C <+/- 3 mV/5% change on input voltage Available current: 1 mA |
|
| Input Power | +5 VDC +/- 5%, < 700 mA @
turn on, < 1.5 Watts Steady State @ +25°C |
|
| Package | 1.02 x 1.02 x 0.59 inches (LxWxH) | |
| Units | 1 PPM = 1x10-6 1 PPB = 1x10-9 | |
| * All aging stabilities are after storage of up to 1 year
and apply after 30 days of continuous operation. The daily aging rate also applies at the time of shipment from factory. |
| ** The Electrical Frequency Adjustment Range is sufficient for the life of the oscillator |
| Specifications subject to change with frequency |
| Available Frequency Range: 5 MHz
to 50 MHz Including 5.0, 10.0, 10.24, 12.352, 16.384, 19.44, 24.576, 24.704, and 32.768 MHz |
| AVAILABLE OPTIONS: Square Wave Output, Low Phase Noise, Different Input Voltage, Wide Electrical Frequency Adjustment, Fast Warm-Up. |
| Home Products |
